c-MET ELISA Kit
-
- Target See all c-MET (MET) ELISA Kits
- c-MET (MET) (Met Proto-Oncogene (MET))
- Binding Specificity
- pTyr1234
-
Reactivity
- Human, Mouse, Rat
- Detection Method
- Colorimetric
- Method Type
- Sandwich ELISA
- Application
- ELISA
- Purpose
- Human/Mouse/Rat Phospho-Met (Y1234) ELISA Kit. This assay semi-quantitatively measures phophorylated Met (Tyr1234) in lysate samples.
- Sample Type
- Cell Lysate, Tissue Lysate
- Analytical Method
- Semi-Quantitative
- Specificity
- The antibody pair provided in this kit recognizes human and mouse Phospho-Met (pTyr1234).
- Characteristics
-
- Rapidly measure phosphorylated protein in lysates
- Screen numerous different cell lysates without performing a Western Blot analysis
- Minimal hands-on time, convenient, and non-radioactive material
- Components
-
- Pre-Coated 96-well Strip Microplate
- Wash Buffer
- Anti-Phospho Antibody
- HRP-Conjugated Secondary Antibody
- Assay Diluent
- TMB One-Step Substrate
- Stop Solution
- Lysis Buffer
- Positive Control Sample
- Material not included
-
- Distilled or deionized water
- 100 mL and 1 liter graduated cylinders
- Tubes to prepare sample dilutions
- Protease and Phosphatase inhibitors
- Precision pipettes to deliver 2 μL to 1 mL volumes
- Adjustable 1-25 mL pipettes for reagent preparation
- Benchtop rocker or shaker
- Microplate reader capable of measuring absorbance at 450 nm
- Featured
- Discover our best selling MET ELISA Kit
-
-
- Sample Volume
- 100 μL
- Plate
- Pre-coated
- Protocol
-
- Prepare all reagents and samples as instructed in the manual.
- Add 100 μL of sample or positive control to each well.
- Incubate 2.5 h at RT or O/N at 4 °C.
- Add 100 μL of prepared primary antibody to each well.
- Incubate 1 h at RT.
- Add 100 μL of prepared 1X HRP-Streptavidin to each well.
- Incubate 1 h at RT.
- Add 100 μL of TMB One-Step Substrate Reagent to each well.
- Incubate 30 min at RT.
- Add 50 μL of Stop Solution to each well.
- Read at 450 nm immediately.
- Reagent Preparation
-
- Bring all reagents and samples to room temperature (18 - 25 °C) before use.
2. Item E, Assay Diluent should be diluted 5-fold with deionized or distilled water before use.
3. Preparation of Positive Control: Briefly spin the Positive Control vial of Item K. Add 400 µL 1x Assay Diluent (Item E, Assay Diluent should be diluted 5-fold with deionized or distilled water before use) into Item K vial to prepare Positive Control (P-1) Solution (See i. Positive Control of part IX.for a typical result in page 9). Dissolve the powder thoroughly by a gentle mix (it can be removed by centrifuge if any precipitate in the solution is found). Pipette 260 µL 1x Assay Diluent into each tube. Use the Positive Control (1) to produce a dilution series (shown below). Mix each tube thoroughly before the next transfer. 1x Assay Diluent serves as the background. Phospho-Met (Tyr1234/1235) ELISA Kit Protocol 6
4. If the Wash Concentrate (20x) (Item B) contains visible crystals, warm to room temperature and mix gently until dissolved. Dilute 20 mL of Wash Buffer Concentrate into deionized or distilled water to yield 400 mL of 1x Wash Buffer.
5. Briefly spin the detection antibody (Item C) before use. Add Add 100 µL of 1x Assay Diluent into the vial to prepare a detection antibody concentrate. Pipette up and down to mix gently (the concentrate can be stored at 4 °C for 5 days or at - 80 °C for one month). The rabbit anti-Met (Tyr1234/1235) Antibody should be diluted 55-fold with 1x Assay Diuent and used in step 4 of Part VII Assay Procedure.
6. Briefly spin the HRP-conjugated anti-rabbit IgG (Item D) before use. Pipette up and down to mix gently. HRP-conjugated anti- rabbit IgG concentrate should be diluted 1,000-fold with 1x Assay Diuent. For example: Briefly spin the vial (ItemD) and pipette up and down to mix gently. Add 10 µL of HRP-conjugated anti- rabbit IgG concentrate into a tube with 10 mL 1x Assay P-1 P-2 P-3 P-4 0 130 µL Positive Control powder 400 µL 1x Assay Diluent 130µ l 130 µL Phospho-Met (Tyr1234/1235) ELISA Kit Protocol 7 Diluent to prepare a 500-fold diluted HRP-conjugated anti-rabbit IgG solution.
7. Cell Lysate Buffer should be diluted 2-folds with deionized or distilled water before use (recommend to add protease and phosphatase inhibitors). VII.
- Bring all reagents and samples to room temperature (18 - 25 °C) before use.
- Sample Preparation
-
Cell lysates - Rinse cells with PBS, making sure to remove any remaining PBS before adding the Cell Lysate Buffer. Solubilize cells at 4 x 107 cells/mL in 1x Cell Lysate Buffer (we recommend adding protease and phosphatase inhibitors to Cell Lysate Buffer prior to sample preparation). Pipette up and down to resuspend and incubate the lysates with shaking at 2 - 8° C for 30 minutes. Microcentrifuge at 13,000 rpm for 10 minutes at 2 - 8° C, and transfer the supernates into a clean test tube. Lysates should be used immediately or aliquoted and stored at -70 °C. Avoid repeated freeze-thaw cycles. Thawed lysates should be kept on ice prior to use.
For the initial experiment, we recommend to do a serial dilution testing such as 5-fold and 50-fold dilution for your cell lysates with 1x Assay Diluent (Item E) before use. Phospho-Met (Tyr1234/1235) ELISA Kit Protocol 5
Note: The fold dilution of sample used depends on the abundance of phosphorylated proteins and should be determined empirically. More of the sample can be used if signals are too weak. If signals are too strong, the sample can be diluted further.
Cell Lysate Buffer should be diluted 2-fold with deionized or distilled water before use (recommend to add protease and phosphatase inhibitors). - Assay Procedure
-
- Bring all reagents to room temperature (18 - 25 °C) before use. It is recommended that all samples or Positive Control should be run at least in duplicate.
2. Add 100 µL of each sample or positive control into appropriate wells. Cover well with plate holder and incubate for 2.5 hours at room temperature or over night at 4 °C with shaking.
3. Discard the solution and wash 4 times with 1x Wash Solution. Wash by filling each well with Wash Buffer (300 µL) using a multi-channel pipette or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.
4. Add 100 µL of prepared 1x detection antibody anti-Met (Tyr1234/1235) (Reagent Preparation step 5) to each well. Incubate for 1 hour at room temperature with shaking. Phospho-Met (Tyr1234/1235) ELISA Kit Protocol 8
5. Discard the solution. Repeat the wash as in step3.
6. Add 100 µL of prepared 1x HRP-conjugated anti-rabbit IgG (see Reagent Preparation step 6) to each well. Incubate for 1 hour at room temperature with shaking.
7. Discard the solution. Repeat the wash as in step3.
8. Add 100 µL of TMB One-Step Substrate Reagent (Item H) to each well. Incubate for 30 minutes at room temperature in the dark with shaking.
9. Add 50 µL of Stop Solution (Item I) to each well. Read at 450 nm immediately.
- Bring all reagents to room temperature (18 - 25 °C) before use. It is recommended that all samples or Positive Control should be run at least in duplicate.
- Calculation of Results
-
ELISA data analysis: Average the duplicate readings for each sample or positive.
i. Positive Control H1993 cells were cultured at 37 °C for 4 days. Solubilize cells at 4 x 107 cells/mL in Cell Lysate Buffer. Serial dilutions of lysates were analyzed in this ELISA. Please see step 3 of Part VI Reagent Preparation for detail. Assay Diluent Positive control dilution series O D = 4 5 0 n m 0.01 0.1 1 10 P-1 P-2 P-3 P-4 0 Phospho-Met (Tyr1234/1235) ELISA Kit Protocol 10
ii. Recombinant Human HGF Stimulation of A431 Cell Lines A431 cells were treated or untreated with 50 ng/mL recombinant human HGF for 5 min. Cell lysates were analyzed using this phosphoELISA. Phospho-Met (Tyr 1234/1235) Pan Met O D =4 50 n m 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Untreated A431 HGF treated A431
iii. SENSITIVITY H1993 cells were cultured at 37 °C for 4 days. Solubilize cells at 4 x 107 cells/mL in Cell Lysate Buffer. Serial dilutions of lysates were analyzed in this ELISA and by Western blot. Immunoblots were incubated with anti-phospho-Met (Tyr1234/1235). Phospho-Met (Tyr1234/1235) ELISA Kit Protocol 11 A) ELISA 40 8 1.6 0.32 0.08 0 ( µg ) O D =4 50 n m 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 B). Western-Blot Analysis 50 25 12.5 6.25 3.13 1.56 0.78 0.39 0 (µg) Phospho-Met (Tyr1234/1235) ELISA Kit Protocol 12 X - Restrictions
- For Research Use only
-
- Handling Advice
- Avoid repeated freeze- thaw cycles.
- Storage
- -20 °C
- Storage Comment
- Upon receipt, the kit should be stored at -20 °C. Please use within 6 months from the date of shipment. After initial use, Wash Buffer Concentrate (Item B), Assay Diluent (Item E), TMB One-Step Substrate Reagent (Item H), HRP-Streptavidin (Item G), Stop Solution (Item I) and Cell Lysate Buffer (Item J) should be stored at 4 °C to avoid repeated freeze-thaw cycles. Return unused wells to the pouch containing desiccant pack, reseal along entire edge and store at -20 °C. Reconstituted Positive Control (Item K) should be stored at -70 °C.
- Expiry Date
- 6 months
-
- Target See all c-MET (MET) ELISA Kits
- c-MET (MET) (Met Proto-Oncogene (MET))
- Alternative Name
- Met (MET Products)
- Synonyms
- AUTS9 ELISA Kit, HGFR ELISA Kit, RCCP2 ELISA Kit, c-Met ELISA Kit, AI838057 ELISA Kit, HGF ELISA Kit, Par4 ELISA Kit, Hgfr ELISA Kit, c-met ELISA Kit, MET ELISA Kit, C-MET ELISA Kit, met ELISA Kit, met-A ELISA Kit, MET proto-oncogene, receptor tyrosine kinase ELISA Kit, met proto-oncogene ELISA Kit, MET proto-oncogene, receptor tyrosine kinase L homeolog ELISA Kit, MET ELISA Kit, Met ELISA Kit, met.L ELISA Kit
- Background
- Met-Y1234
- Gene ID
- 4233
- UniProt
- P08581
- Pathways
- RTK Signaling, Carbohydrate Homeostasis, Synaptic Membrane, Signaling of Hepatocyte Growth Factor Receptor
-