SULF1 CLIA Kit

Catalog No. ABIN5658989

Product Details SULF1 CLIA Kit

Target: SULF1 (Sulfatase 1 (SULF1))

Reactivity: Human

Detection Method: Chemiluminescent

Method Type: Sandwich ELISA

Detection Range: 6.25 pg/mL - 400 pg/mL

Minimum Detection Limit: 6.25 pg/mL

Application: ELISA

Sample Type: Plasma, Serum, Tissue Homogenate

Analytical Method: Quantitative

Specificity: This assay has high sensitivity and excellent specificity for detection of Sulfatase 1 (SULF1). No significant cross-reactivity or interference between Sulfatase 1 (SULF1) and analogues was observed.

Sensitivity: 0.23 pg/mL

Application Details

Comment:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay Time: 2 - 3 h

Plate: Pre-coated

Protocol: The microplate provided in this kit has been pre-coated with an antibody specific to Sulfatase 1 (SULF1). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Sulfatase 1 (SULF1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Sulfatase 1 (SULF1) level in the sample or standard.,

Assay Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Sulfatase 1 (SULF1) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Sulfatase 1 (SULF1) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice: Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Storage: 4 °C,-20 °C

Storage Comment: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Expiry Date: 4-8 months

Target Details

Target: SULF1 (Sulfatase 1 (SULF1))

Alternative Name: Sulfatase 1 (SULF1 Products)

Synonyms: HSULF-1 CLIA Kit, SULF-1 CLIA Kit, CG6725 CLIA Kit, DSulf CLIA Kit, DSulf1 CLIA Kit, Dmel\\CG6725 CLIA Kit, Dsulf1 CLIA Kit, Neu5 CLIA Kit, sulf1 CLIA Kit, AI467640 CLIA Kit, AW121680 CLIA Kit, mKIAA1077 CLIA Kit, fk14e08 CLIA Kit, wu:fk14e08 CLIA Kit, SULF1 CLIA Kit, sulf-1 CLIA Kit, XtSulf1 CLIA Kit, hsulf-1 CLIA Kit, XtSulf-1 CLIA Kit, sulfatase 1 CLIA Kit, Sulfated CLIA Kit, extracellular sulfatase SULF-1 homolog CLIA Kit, SULF1 CLIA Kit, Sulf1 CLIA Kit, sulf1 CLIA Kit, LOC410233 CLIA Kit

Background:

Gene Name: Sulfatase 1

Gene Aliases: HSULF-1, Extracellular sulfatase Sulf-1

Gene ID: 23213

UniProt: Q8IWU6

Pathways: EGFR Signaling Pathway