SIK2 ELISA Kit

Catalog No. ABIN5658588

Product Details SIK2 ELISA Kit

Target: SIK2 (Salt-Inducible Kinase 2 (SIK2))

Reactivity: Human

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 0.156 ng/mL - 10 ng/mL

Minimum Detection Limit: 0.156 ng/mL

Application: ELISA

Sample Type: Cell Lysate, Tissue Homogenate

Analytical Method: Quantitative

Specificity: This assay has high sensitivity and excellent specificity for detection of Salt Inducible Kinase 2 (SIK2). No significant cross-reactivity or interference between Salt Inducible Kinase 2 (SIK2) and analogues was observed.

Sensitivity: 0.065 ng/mL

Application Details

Comment:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay Time: 3 h

Plate: Pre-coated

Protocol: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Salt Inducible Kinase 2 (SIK2). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Salt Inducible Kinase 2 (SIK2). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Salt Inducible Kinase 2 (SIK2), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Salt Inducible Kinase 2 (SIK2) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Assay Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Salt Inducible Kinase 2 (SIK2) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Salt Inducible Kinase 2 (SIK2) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Storage: 4 °C,-20 °C

Storage Comment: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Expiry Date: 4-8 months

Target Details for SIK2

Target: SIK2 (Salt-Inducible Kinase 2 (SIK2))

Alternative Name: Salt Inducible Kinase 2 (SIK2 Products)

Synonyms: PIG33 ELISA Kit, SC1 ELISA Kit, LOH11CR1I ELISA Kit, QIK ELISA Kit, SNF1LK2 ELISA Kit, G630080D20Rik ELISA Kit, Snf1lk2 ELISA Kit, RGD1559698 ELISA Kit, si:dkey-27p23.1 ELISA Kit, snf1lk2a ELISA Kit, SPARC like 1 ELISA Kit, salt inducible kinase 2 ELISA Kit, salt-inducible kinase 2 ELISA Kit, salt-inducible kinase 2a ELISA Kit, SPARCL1 ELISA Kit, SIK2 ELISA Kit, SLK2 ELISA Kit, Sik2 ELISA Kit, sik2a ELISA Kit

Background:

Gene Name: Salt Inducible Kinase 2

Gene Aliases: LOH11CR1I, QIK, SNF1LK2, SNF1-Like Kinase 2, Qin-induced kinase, Serine/threonine-protein kinase SNF1-like kinase 2

Gene ID: 23235

UniProt: Q9H0K1