Keratin 33A ELISA Kit
-
- Target See all Keratin 33A (KRT33A) products
- Keratin 33A (KRT33A)
- Reactivity
- Human
- Detection Method
- Colorimetric
- Method Type
- Sandwich ELISA
- Detection Range
- 78.12 pg/mL - 5000 pg/mL
- Minimum Detection Limit
- 78.12 pg/mL
- Application
- ELISA
- Sample Type
- Plasma, Serum
- Analytical Method
- Quantitative
- Specificity
- This assay has high sensitivity and excellent specificity for detection of Keratin 33A (KRT33A). No significant cross-reactivity or interference between Keratin 33A (KRT33A) and analogues was observed.
- Sensitivity
- 29 pg/mL
- Featured
- Discover our best selling KRT33A ELISA Kit
-
-
- Comment
-
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
- Assay Time
- 3 h
- Plate
- Pre-coated
- Protocol
- The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Keratin 33A (KRT33A). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Keratin 33A (KRT33A). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Keratin 33A (KRT33A), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Keratin 33A (KRT33A) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
- Assay Precision
-
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Keratin 33A (KRT33A) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Keratin 33A (KRT33A) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12% - Restrictions
- For Research Use only
-
- Handling Advice
- The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.
- Storage
- 4 °C,-20 °C
- Storage Comment
- -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.
- Expiry Date
- 4-8 months
-
- Target See all Keratin 33A (KRT33A) products
- Keratin 33A (KRT33A)
- Alternative Name
- Keratin 33A (KRT33A Products)
- Synonyms
- HA3I ELISA Kit, Ha-3I ELISA Kit, K33A ELISA Kit, KRTHA3A ELISA Kit, Krt1-3 ELISA Kit, hHa3-I ELISA Kit, KRT33A ELISA Kit, krtha3a ELISA Kit, 2310015J09Rik ELISA Kit, Ka27 ELISA Kit, RGD1306249 ELISA Kit, keratin 33A ELISA Kit, KRT33A ELISA Kit, Krt33a ELISA Kit
- Background
-
Gene Name: Keratin 33A
Gene Aliases: KRTHA3A, Ha-3I, Krt1-3, K33A, HHA3-I, HKA3A, Keratin,Hair,Acidic 3A, Hard Keratin Type I 3I, Keratin, type I cuticular Ha3-I
- Gene ID
- 3883
- UniProt
- O76009
-