CLCA1 ELISA Kit

Catalog No. ABIN5652870

Product Details CLCA1 ELISA Kit

Target: CLCA1 (Chloride Channel Accessory 1 (CLCA1))

Reactivity: Human

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 0.156 ng/mL - 10 ng/mL

Minimum Detection Limit: 0.156 ng/mL

Application: ELISA

Sample Type: Cell Lysate, Tissue Homogenate

Analytical Method: Quantitative

Specificity: This assay has high sensitivity and excellent specificity for detection of Chloride Channel Accessory 1 (CLCA1). No significant cross-reactivity or interference between Chloride Channel Accessory 1 (CLCA1) and analogues was observed.

Sensitivity: 0.064 ng/mL

Application Details

Comment:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay Time: 3 h

Plate: Pre-coated

Protocol: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Chloride Channel Accessory 1 (CLCA1). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Chloride Channel Accessory 1 (CLCA1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Chloride Channel Accessory 1 (CLCA1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Chloride Channel Accessory 1 (CLCA1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Assay Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Chloride Channel Accessory 1 (CLCA1) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Chloride Channel Accessory 1 (CLCA1) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Storage: 4 °C,-20 °C

Storage Comment: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Expiry Date: 4-8 months

Target Details for CLCA1

Target: CLCA1 (Chloride Channel Accessory 1 (CLCA1))

Alternative Name: Chloride Channel Accessory 1 (CLCA1 Products)

Synonyms: CACC ELISA Kit, CACC1 ELISA Kit, CLCRG1 ELISA Kit, CaCC-1 ELISA Kit, GOB5 ELISA Kit, hCLCA1 ELISA Kit, hCaCC-1 ELISA Kit, Clca3 ELISA Kit, fi39d11 ELISA Kit, wu:fi39d11 ELISA Kit, AECC ELISA Kit, Clca1 ELISA Kit, Clca2 ELISA Kit, gob-5 ELISA Kit, gob5 ELISA Kit, chloride channel accessory 1 ELISA Kit, chloride channel ELISA Kit, chloride channel protein ELISA Kit, CLCA1 ELISA Kit, Clca1 ELISA Kit, clca1 ELISA Kit, clcA1 ELISA Kit

Background:

Gene Name: Chloride Channel Accessory 1

Gene Aliases: CaCC1, CLCRG1, Chloride Channel,Calcium Activated,Family Member 1, Calcium-activated chloride channel protein 1

Gene ID: 1179

UniProt: A8K7I4